The Eaton Power-Sure 800 offers the solution for any application with noisy or poor power quality and is available in office, floor or wall/panel mounted industrial models. The Power-Sure 800 cleans up and purifies fluctuating and erratic power that exists in commercial and industrial facilities so that sensitive electronic equipment is not affected. The Power-Sure 800 is a self-regulating isolation transformer that was developed to protect against fluctuating voltages, brownouts, line noise, short-duration power outages, sags, surges, spikes and transients. It also has one of the highest K-factors—K-30—and eliminates harmonic current in the power line, which helps prevent damage to building wiring. The Power-Sure 800 is ideal for use in industrial applications, such as computer programmable controllers and robotics. Use the Power-Sure 800 whenever continuous, well-regulated, transient-free power is required.
Eaton Power-Sure 800 Features
- Ratings from 500 VA to 25 kVA
- Voltage range from 120V to 480V
- Office models (with receptacles)
- Hardwired models (wall/panel mount and floor mount)
- Line regulation ±3% V-out for +10% to –20% V-in at 100% load
- Load regulation ±3% for 0–75% load to ±2% for 100% load
- Immunity to distortion at 40% THD V-in, 5% max. THD V-out
- Ride-through capability of 1 cycle
- Voltage recovery of 2 cycles to 95%, 3 cycles to 100
- K-30 rated K-factor
- Harmonic attenuation of –23 dB for load-reflected harmonics
- Surge protection of 330V let-through voltage
- Common mode noise attenuation of 140 dB
- Transverse mode noise attenuation of 120 dB
- Reliability of 200,000 hours (MTBF)
- Audible noise of 52–56 dB at 1 meter
- Efficiency of 92% at full load
- Operating temperature of –20°C to +40°C
- Two-year warranty
- Superior isolation
- Bi-directional harmonic filtering
- Meets ANSI standards for computers with inputs as low as 50 percent of nominal
- UL 1012, UL 544 and cUL Listed
Eaton Power-Sure 800 Specifications