The PDI PowerPak 2 PDU provides intelligent and flexible power distribution with a 42 inch x 40 inch cabinet housing a 100 kVA – 400 kVA transformer all within a small footprint and true front accessibility. The PowerPak 2 PDU, by PDI, an Eaton Company, offers hundreds of possible distribution configurations. A patent pending 3D access window allows true front access (TFA) for service and maintenance and panel board and/or sub feed distribution in the main cabinet. PowerPak 2 offers a transformer with up to 400kVA DOE2016, and incorporates compartmentalized design in order to isolate low and high voltage components.
PDI PowerPak 2 PDU Features
- Five Tier True Front Access (TFA) enables operation, maintenance and service from the front of the PDU maximizing safety.
- Smallest foot-print in the industry, the PowerPak 2 PDU can accommodate up-to a 400kVA DOE2016 transformer while maintaining a True Front Access (TFA) main cabinet size of 42” width.
- Front Access Infrared Scanning, a patent pending 3D Access Window and Specialized Transformer designs enable infrared scanning from the front of the PDU.
- PowerPak 2 offers DOE compliant transformers in sizes up to 400 kVA DOE2016.
- The PowerPak 2 PDU offers multiple distribution panelboard and sub feed options in-cabinet and in optional side cars.
- Isolated compartments for both high and low voltage components simplify maintenance and increase safety.
- Intelligent Power Monitoring by PDI’s Branch Circuit Monitoring System (BCMS) allows for the pro-active management of power usage and availability.
- Landing service entrance cables has never been easier with Top/Bottom Entry/Exit configurations.
PDI PowerPak 2 PDU Specifications
| Ratings | |
| kVA Rating | 100kVA – 400kVA |
| Input | 3-phase, 3-wire plus ground |
| Input Voltage | @ 50 Hz: 380V – 415V @ 60 Hz: 600, 480 or 208V |
| Output | 3-phase, 4-wire plus ground |
| Output Voltage | @ 50 Hz: 575, 415/240, or 380/230V @ 60 Hz: 600, 575, 480, or 208/120V 200% neutral busbar connection Listed to UL 60950-1, CSA C22.2#60950-1, UL 891, IEC 60950-1, EN 60950-1, EN 61000-6-2, EN 61000-6-4 |
| Transformers | DOE2016 transformers standard for USA. Operating Efficiency: 98% or better. Copper wound construction – better conducting and more resilient than aluminum. Dual electrostatic shield – attenuates high frequency noise. Oversized 200% neutral conductor. Common mode noise protection. Transverse mode noise protection. Optional Quad-Wye® Technology solves harmonic problems by canceling the destructive triplen and non-triplen current harmonics. |
| Enclosure | NEMA 1 enclosure with removable front, side, and rear panels. Integrated two-point latch and vision panels. Flush-mounted door handle with integral locks. Advanced door catch assures positive closure. Optional floor skirts. |
| Operating Conditions | Operating Temperature: ambient 0°C to 40°C. Relative humidity: 0% to 95% non-condensing. Altitude ≤ 10,000 ft. 50 Hz Operating Range: 47-53 Hz. 60 Hz Operating Range: 57-63 Hz. Storage Temperature: ambient -10°C to +40°C. |
| Monitoring | Monitor: WaveStar® monitor. WaveStar® color touch monitor. Communications: Serial RS-485 Modbus RTU; optional SNMP or TCP/IP communications. BCMS: Available as factory-installed option. Options: Per circuit output monitoring. Thermal: Dual transformer thermal sensors. True RMS metering. Accurate kW, power factor and THD measurement. |
| Transient Suppression Network (TSN) | An integrated system engineered to meet ANSI/IEEE category C standards for transient voltages and surge currents. |
| Lightning Arrestor/Surge Suppressor | Protects the insulation of the system magnetics. |
| Distribution Panelboards/Sub-Feed Breakers | Customized distribution configurations meet the demands of any facility. |
| Redundant Power Distribution Systems | WaveStar® Manual Dual System Dual-Input power distribution system allows for manual source selection to isolate upstream equipment and facilitate system maintenance and repair. |
For more in-depth specifications, see the data sheet.
For more information about PDI PowerPak 2 PDU,
call 86 21 5859 8677 or email sales@alphaenertech.com.