EnerSys DataSafe 12XE1110F-FR

• Capacity range: 763 to 1150 Watts Per Cell (WPC) / five minute rate to 1.67 Vpc
• 12-year design life and up to 17 months shelf life at 77°F (25°C)
• Fast recharge times to support multiple outages
• Available in front and top terminal configuration
• Containers and lids in UL94 V-0 rated flame retardant ABS material, highly resistant to shock and vibration
• High grade sulphuric acid electrolyte absorbed into separator material
• Proven high integrity leak resistant dual-seal terminal design
• Self-regulating pressure relief valves prevent ingress of oxygen
• Flame arrestors built into each bloc for increased operational safety
• Robust rope handles for ease of handling
• Monoblocs are designed for installation in cabinets or on racks, close to the point of use. A separate battery room is not necessary
• It is recommended that DataSafe® XE blocs are installed upright
• Recommended float charge voltage: 2.27Vpc at 77°F (25°C) 2.29Vpc at 68°F (20°C)
• Low maintenance: no water addition required
• Wide operating temperature range: -40°F (-40°C) to 122°F (50°C)
• Connection torque: 9 ± 0.9 Nm – 80 ± 8 lbf in
• Up to 17 months shelf life

EnerSys DataSafe 12XE1110F-FR Specifications

Nominal Voltage: 12V
Watts/Cell (wpc) 5min/1.67Vpc 77°F: 1109
Watts/Cell (wpc) 15min/1.67Vpc 77°F: 649
Nominal Capacity C10/1.80Vpc 68°F: 165
Nominal Capacity C10/1.80Vpc 68°F: 167
Short Circuit Current: 3916 A
Internal Resistance (mΩ): 3.2
Terminals: M6 male
Dimensions: 22.9 in. L x 4.9 in. W x 11.1 in Overall height
Weight: 114 lbs.

Standards

• Designed to be compliant with the requirements of international standard IEC 60896-21/22
• UL recognized component
• Classified as non-spillable and approved as non-hazardous cargo for ground, sea and air transportation in accordance with the requirements of International Maritime code for Dangerous Goods (IMDG) and International Civil Aviation Organization (ICAO)