Deka Fahrenheit HT200ET

The Deka Fahrenheit HT200ET features a heat-tolerant VRLA monobloc battery design that survives up to 3X longer in temperatures of 60°C, far beyond the life of a normal VRLA battery.

Deka Fahrenheit HT200ET Features

• Helios™ additive reduces float current up to 75% enhancing high temperature life
• THT™ plastic specifically formulated heat-resistant plastic case and cover optimizes compression
• Microcat® catalyst lowers float current, mitigates thermal buildup and cell dryout
• Exclusive IPF® technology optimizes power capacity, cell consistency, and long-term reliability
• TempX™ alloy inhibits corrosion under the highest temperature extremes
• Advanced AGM technology for superior power
• Puncture resistant micro-porous glass mat separators extend life
• Front access design for easy installation and maintenance
• Reinforced case resists bulging and meets safety requirements (UL 94 V-0)
• Case & cover heat sealed and 100% tested to prevent leaks
• Epoxy-sealed posts eliminate leaks
• Flame arresting, low pressure, self-sealing valves are 100% factory tested
• Computer-aided design and manufacturing control processes and standards to ensure quality products
• All batteries meet or exceed IEEE recommended practices
• Battery design and construction meet UL recognition requirements

Deka Fahrenheit HT200ET Specifications

Nominal Voltage: 12-Volts
Rating: 190 Ampere-Hours @ 8 hr. rate to 1.75 V.P.C.
Positive Plate: >98% Pure lead with tin-calcium alloy
Negative Plate: Pure lead, calcium alloy
Post Seal: Epoxy-sealed
Terminal: Front access, 1/4″ – 20 threaded insert
Case/Cover: Flame-retardant, THT™ – UL 94 V-0/>39% L.O.I.
Catalyst: Microcat®
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 V.P.C. ± 0.01 V.P.C. @ 77°F (25°C)
Range: (13.44V to 13.56V per battery)
Design life: 12 years in float applications @ 77°F (25°C)
Dimensions: Length – 24.15″ (613.4 mm), Width – 4.97″ (126.3 mm), Height – 12.74″ (323.5 mm), Weight: 151 Ibs. (68.5 kg)

For more in-depth specifications, see the data sheet.