Deka Solar Batteries

Deka Flooded System / 2V

Higher voltage systems naturally have greater power requirements. Deka Solar Maintenance Saver® Flooded Batteries are available as a single cell or system. They are designed to offer reliable, low maintenance power for renewable energy applications where frequent deep cycles are required and minimum maintenance is desirable.

• Plates formed using IPF® Technoloyg – Optimizes power capacity, cell consistency, and long term reliability
• Jar and Cover – Molded high impact polypropylene
• Separators – Microporous polyethylene material
• Retainers – Vertically and horizontally wrapped glass mat, folded perforated envelope, molded plastic bottom shield
• Positive and Negative Plate – Antimony flat plate
• Specific Gravity (fully charged) – 1.250 @ 25°C (77°F).
• Self discharge – 4% per month
• Cycle life – 1500 cycles @ 80% DOD, 4000 cycles @ 20% DOD [Number of cycles based on 6-hr. rate @ 25°C (77°F)]

Deka Flooded System / 2V Spec Sheet 

Deka Gel System / 2V

The Deka Solar Dominator® Valve-Regulated Gel electrolyte battery is designed to offer reliable, maintenance-free power. It is available as a single cell or system. The gelled electrolyte protects the battery plates making it ideal for renewable energy deep cycle applications.

• Valve-Regulated – Sealed construction eliminates watering, corrosive acid fumes, and spills
• Gelled Electrolyte – Electrolyte will not stratify
• Positive & Negative Plate – Lead calcium
• Self-Discharge – Less than 2% per month stand loss means little deterioration during transport and storage
• Exclusive IPF® Technology – Optimizes power capacity, cell consistency, and long-term reliability

Deka Gel System / 2V Spec Sheet 

Deka AGM Modules / 2V

The Deka Unigy® II line, available in single cell or system designs, includes a wide range of capacities and sizes to fit the requirements of renewable energy applications. The Deka Unigy® II Standard Design allows modules to be stacked horizontally and connected by only four bolts (two in front – two in back), for quick and safe battery installation. The cell terminals are solid copper with lead plating, and are designed for maximum conductivity. The Deka Unigy® II Interlock™ System utilizes interlocking modules to maximize convenience with front access bolting. This system delivers more power in less space while maintaining cooling requirements. Advanced features provide easy and safe installation such as “two way” post, and easy on/off front shields. Equipped with a standard one-piece Interlock™ base, the system meets Zone 4 seismic specifications and is certified up to 8 modules high.

• Valve-Regulated – Sealed construction eliminates periodic watering, corrosive acid fumes, and spills
• Case and Cover – Molded high impact flame retardant polypropylene, UL 94 V-0, 28% L.O.I.
• Separators – Microporous glass mat
• Positive and Negative Plate – Lead tin
• MICROCAT™ Catalyst – Lowers float current, decreases internal temps, and the risk of dryout
• Self-Discharge – Less than 2% per month stand loss means little deterioration during transport and storage
• Plates – Formed using Ensures voltage matching between cells
• IPF™ Technology Rated Non-Spillable by ICAO, Transports easily and safely by air, IATA, and DOT – no special containers needed

Deka AGM Modules / 2V Unigy II Series Spec Sheet